Varga Enterprises

CRC

For nearly 50 years CRC has gained the respect of technicians, drivers and distributors alike by providing superior quality products they can count on — and you can too.

From brake and electrical maintenance to aviation, gear oil and diesel additives, CRC has got you covered.

Aviation Degreaser

A Halogenated solvent-based degreaser that is chemically stable and extremely effective in heavy duty cleaning applications. It is fast acting, non-flammable and evaporates quickly leaving no residue.

• -Non-Flammable
• -Effectively removes corrosion inhibiting compound
• -Removes carbon build-up
• -High dielectric strength of 26,800 volts
• -Cleans and prepares metal surfaces for painting and adhesive bonding
• -Meets performance requirements of Boeing D6-17487 and Douglas CSD-1, Category II with the exception of acrylic crazing
• -Not for use in California

C.I.C Remover

Revolutionary alternative to 1,1,1-Trichlorothethane and other chlorinated solvents that effectively removes grease, oil, dirt and other contaminants from aircraft interior surfaces and equipment.

• -Low odor compound, unlike strong smelling citrus cleaners
• -High flashpoint – over 200°F
• -Removes carbon build-up
• -Promotes operating efficiency and longer equipment life
• -High dielectric strength of 39,600 volts
• -Chemically stable, non-conducting and non-corrosive action
• -Controlled evaporation for enhanced cleaning action
• -Zero VOC formula

Precision Plus® Contact Cleaner

A high purity HCFC/PFC-based precision cleaner that quickly and effectively cleans sensitive electrical and electronic components. PRECISION PLUS Contact contains HCFC-225 which may only be sold to commercial users.

• -Plastic Safe
• -Non-Flammable
• -Evaporated quickly and leaves no residue
• -Non-staining and non-corrosive
• -Meets performance requirements of Boeing D617487, Rev L, Douglas CSD-1, ASTM F945 and PWA 36604 Appendix A
• -Approved by Pratt ® Whitney for use in SPOP6
• -Controlled evaporation for enhanced cleaning action
• -Zero VOC formula

Aviation NT™ Precision Cleaner

Patented formula NT Precision Cleaner relies on advanced COzol® Technology to effectively remove dirt, light oils and other contaminants from electronic equipment. It evaporates quickly and leaves no residue. NT Precision Cleaner has no flash point and contains no Class I or Class II ozone depleting chemicals and is an optimal alternative to HCFC 141b-based cleaners when sensitive plastics aren’t an issue.

• -No flash point
• -Fast evaporation, leaves no residue
• -Non-corrosive, non-conductive and chemically stable
• -High dielectric strength of 30,800 volts
• -Tests on plastics
• -Meets performance requirements of Boeing D6-17487
• -Not for use in California

Precision Contact Cleaner

A high purity HCFC-based precision cleaning solvent designed to meet today’s cleaning challenges. Precision Contact Cleaner Contains HCFC (141b) which has user’s restrictions and may only is sold to commercial users for applications consistent with the regulation.

• -Fast evaporating, leaves no residue
• -Effectively cleans to help maintain peak operating performance
• -No flashpoint, non-conductive and non0corrosive
• -Fast cleaning action for the removal of flux, light oils and other contaminants
• -Surpasses performance properties of conventional precision cleaners

3-36® Multi-Purpose Lubricant and Corrosion Inhibitor

Meets MIL-C-81309E, Amendment 3, Type III, Class 1 ® 2 – Listed on the Military QPL Since 12/1999. This versatile, Petroleum-based formula lubricates penetrates, cleans and protects all metal surfaces. It loosens seized mechanisms and frozen fasteners while leaving behind a lubricating and corrosion inhibiting film. The low viscosity of Aviation 3-36 allows it to cover a large surface area and penetrate deep into the surface of all metals including steel, copper, brass and aluminum alloys. It displaces and seals out moisture and prevents the return of wear and corrosion. For use in applications that require compliance to MIL-C-81309E.

• -Lubricates, penetrates, cleans and protects all metal surfaces
• -Loosens seized mechanisms and frozen fasteners
• -Prevents corrosion to improve equipments life and performance
• -Continues to protect even after initial product application

Aviation XT-2000™ Precision Cleaner

A non-flammable, low odor, rapidly evaporating precision cleaner for use in electrical and industrial applications. Effectively removes dirt, light oils and other contaminants from electronic equipment.

• -No flash point
• -Evaporates rapidly leaving no residue
• -Chemically stable, non-conductive and non-corrosive
• -Safe on most plastics
• -Meets performance requirements of Boeing D6-17487

Quick Dry Precision Cleaner

Effectively removes contaminants from electrical and electronic components and contacts. Ideal for applications where rapid evaporation is desired and flammability is not an issue.

• -Harmless to most sensitive plastics
• -Evaporates rapidly, leaves no residue
• -Displaces moisture
• -Safe on most plastics
• -Meets performance requirements of Boeing D6-17487 and McDonnell Douglas CSD-1 specifications

Aviation Window Cleaner

A modern blend of detergents and corrosion inhibitors designed to safely clean aircraft glass, Plexiglas and other surfaces.

• -Non-irritating
• -Penetrates through film and other surfaces contaminants to get glass and mirrors sparkling clean
• -Removes grease, fingerprints, scum and smoke haze from surfaces
• -Contains no alcohol or ammonia
• -Meets the performance requirements of AMS-1534A

Back To Top