Mitchell
Mitchell
Mitchell Recording Tachometers
Mitchell mechanical recording tachometers are specified accurate to within 25 RPM over the range of 1000 to 3000 RPM. Range-marked dials (shown) and lighted bezels are available as options.
3 1/8″ Recording Tachs
Range 0-3500 RPM Length 3-1/2 Inches
Part No. Description
MIT RT7 Rec Tach, 3 1/8″ 2300rpm D1-112-5023, Mitchell
MIT RT11 Rec Tach, 3 1/8″ 2500rpm D1-112-5025, Mitchell
MIT D1-211-5090
MIT D1-211-5102
MIT RT11
Shipping Weight 1 Lb.
Accuracy to within ±25 RPM. Range marking material included. Two year warranty
MIT D1-112-5023 Aero Commander A9, A9A, A9B
Stewart Warner P-551-AZ Aeronca 15AC Sedan
AC Type RT-7 Grumman/America AA1, AA1A, AA5
Clockwise Rotation Beech C35, D35, E35, F35
2300 Cruise RPM Call for more details
MIT D1-112-5122 Beech 35, A35, B35, 35R
Stewart Warner P-551-AZ AC Type RT-8
Clockwise Rotation 2050 Cruise RPM
MIT D1-112-5030 Aeronca Champion-Chief (Early Models)
Stewart Warner P-551-AZ Piper PA15, PA18 w/TCM engine
AC Type RT-9
Counter Clockwise Rot 2300 Cruise RPM
MIT D1-112-5124 Aeronca Champion-Chief (Late Models)
Stewart Warner P-551-AZ Champion 7AC, 11AC, 7CCM
AC Type RT-10
Counter Clockwise Rot 2050 Cruise RPM
MIT D1-211-5051
MIT D1-211-5052
MIT D1-211-5063
MIT D1-211-5074
MIT D1-112-5025 Beech, All Musketeer and Debonair models
Stewart Warner P-551-TA Bonaza models G35-V35, V35TC, 36, A36, 95
AC Type RT-11 B95, B95A, D95A
Clockwise Rotation Cessna 150, 152, 172, 177, 185 & 188 w/IO-520
2566 Cruise RPM 206, 207, 210, 310, 320
Navion E, F, G
MIT D1-112-5032 Bellanca/Champion 7ACA
Stewart Warner P-551-AZK Stinson 105, 108
AC Type RT-12
Counter Clockwise Rot 2566 Cruise RPM
MIT D1-112-5024 Maule M5, M6,MX7-180, M5, M6, M7, MX7-235
Clockwise Rotation 2400 Cruise RPM
MITCHELL Recording Tachometers
2 1/4″ Recording Tachs
Part No. Description
MIT 2-14RT7 Tach Rec Clockwise 2300 Cruise 2 1/4″, Mitchell
MIT 2-14RT11 Tach Rec Clockwise 2566 Cruise 2 1/4″, Mitchell
Accuracy to within ±25 RPM. Range marking material included.
Two year warranty
2in Tach
3In CCW
3in Tach
Elec-Tac
Tachometers
3-1/8 Inch Mechanical Recording, Clockwise
FAA-TSO Approved
D1-112-5028 1800 RPM
D1-112-5122 2050 RPM
D1-112-5023 2300 RPM
D1-112-5024 2400 RPM
D1-112-5025 2566 RPM
D1-112-5034 3000 RPM
3-1/8 Inch Mechanical Recording, Counter-Clockwise
FAA-TSO Approved
D1-112-5029 1800 RPM
D1-112-5124 2050 RPM
D1-112-5030 2300 RPM
D1-112-5032 2566 RPM
2-1/4 Inch Mechanical Recording
FAA-TSO Approved
D1-112-5223 2300 RPM
D1-112-5225 2566 RPM
D1-112-5227 2050 RPM
D1-112-5240 Special-Rotax 912
2-1/4 Inch Electric, Lighted
D1-211-5012 3K RPM Auto Ignition
D1-211-5021 8K RPM Rotax 912/914
Mitchell Modular Instruments
Popular space saving Mitchell modular gauges are lightweight and economical. Units measure 1.5″ square and are 2.62″ in depth. All units are internally lighted and can be mounted horizontally or vertically from front of panel. Note: recommended panel cutout is 4 9/16″ x 3 1/16″ for a six gauge cluster two instruments high by 3 instruments wide. Special orders available in centigrade.
Mitchell 1 1/2″ Modular Instruments
Part No. Description
MIT D1-211-6106 Rec Tach, 3 1/8″ 2300rpm D1-112-5023, Mitchell
Part No. Description
MIT D1-211-6071 Fuel Quantity Gauge 1 1/2″ 240-33 Right Ohm, Mitchell
MIT D1-211-6072 Fuel Quantity Gauge 1 1/2″ 240-33 Left Ohm, Mitchell
MIT D1-211-6076 Fuel Quantity Gauge 1 1/2″ PMA 0-200 Ohm, Mitchell
MIT D1-211-6077 Fuel Quantity Gauge 1 1/2″ 0-30 Right PMA, Mitchell
MIT D1-211-6078 Fuel Quantity Gauge 1 1/2″ 0-30 Left PMA, Mitchell
MIT D1-211-6079 Fuel Quantity Gauge 1 1/2″ 30 OHM, Mitchell
Part No. Description
MIT D1-211-6086 Voltmeter gauge 1 1/2″ 8-16 volt PMA, Mitchell
MIT D1-211-6087 Voltmeter gauge 1 1/2″ 28 volt (12-31V), Mitchell
Part No. Description
MIT D1-211-6102 CHT Gauge 1 1/2″ 100-600 degree, Mitchell
Part No. Description
MIT RD1-211-6090 Oil Pressure Gauge 1 1/2″ 0-100 psi PMA, Mitchell
MIT D1-211-6093 Oil Pressure Gauge 1 1/2″ 0-80 psi, Mitchell
Part No. Description
MIT D1-211-6061 Fuel Pressure Gauge 1 1/2″ 0-15 psi PMA, Mitchell
MIT D1-211-6064 Fuel Pressure Gauge 0-30 psi, Mitchell
Part No. Description
MIT RD1-211-6066 Oil Temperature Gauge 1 1/2″ 120-300 degree F, Mitchell
Part No. Description
MIT D1-211-6088 Liquid Temperature Gauge 1 1/2″ 100-250 degree F, Mitchell
Gauge Mounting
Part No. Description
MIT PM-211-6811 1 Gauge Back Plane, Mitchell
MIT PM-211-6808 2 Gauge Back Plane 1 x 2 Horizontal, Mitchell
MIT PM-211-6826 2 Gauge Back Plane 2 x 1 Vertical, Mitchell
MIT PM-211-6805 4 Gauge Back Plane 1 x 4, Mitchell
MIT PM-211-6823 4 Gauge Back Plane 4 x 1, Mitchell
MIT PM-211-6825 4 Gauge Back Plane 2 x 2, Mitchell
MIT PM-211-6806 5 Gauge Back Plane 1 x 5, Mitchell
MIT PM-211-6804 6 Gauge Back Plane 1 x 6, Mitchell
MIT PM-211-6803 6 Gauge Back Plane 2 x 3, Mitchell
MIT PM-211-8 8 Gauge Back Plane 1 x 8, Mitchell
MIT PM-211-6801 8 Gauge Back Plane 2 x 4, Mitchell
MIT PM-211-6829 10 Gauge Back Plane 5 x 2, Mitchell
Important Ordering Information –> You must provide the following information for proper system configuration.
• Number of gauges in backplane
• Rows x width
• Order in which gauges will be assembled in backplane by type
Mitchell Senders, Shunts & Probes
Part No. Description
MIT PS-211-9101 Shunt Ammeter 75 amp PMA, Mitchell
MIT PS-211-8038 Sender Fuel quantity PMA 10-180 Ohm, Mitchell
MIT PS-211-9002 Sender Oil Pressure 80 psi, Mitchell
MIT PS-211-9039 Sender Oil Pressure 100 psi PMA, Mitchell
MIT PS-211-9040 Sender Oil Pressure 150 psi PMA, Mitchell
MIT PS-211-9000 Sender Fuel Pressure PMA 30 psi, Mitchell
MIT PS-211-8045 Sender Oil Temperature 5/8-18 250 degree PMA, Mitchell
MIT PS-211-8112 Sender Oil Temperature 5/8-18 300 degree PMA, Mitchell
MIT PS-211-8044 Sender Oil Temperature 1/8″ NPT 250 degree, Mitchell
MIT PS-211-8090 Sender Oil Temperature 1/8″ NPT 300 degree, Mitchell
MIT PS-211-8168 Cylinder Head Temp Sender 18mm, Mitchell
MIT PS-211-8156 Cylinder Head Temp Probe Type, Mitchell
MIT PS-211-8010 Cylinder Head Temp Lead Wire 10′, Mitchell
MIT PS-211-8012 EGT Lead Wire 10′, Mitchell
MIT PS-211-8100 Pressure Sender Mount Kit, Mitchell
NPT – National Pipe Thread Taper
Note! Pipe thread sizes do not refer to any physical dimensions. The outside diameter of a pipe or fitting must be measured and referenced to a table for size identification.
Note! Inserting a NPT tapered fitting into a port tapped for a straight thread fitting and tightening it can break or severely damage the item the fitting is being installed in.
Pipe Size Thread Pitch Fitting O.D. NPT Specifications
(Inch) TPI (inch)
1/16″ 27 0.313″ Tapered thread 1° 47′
1/8″ 27 0.405″ Flat Truncation of threat roots and crests
1/4″ 18 0.540″ Thread angle°
3/8″ 18 0.675″ Thread Pitch measured in threads per inch
1/2″ 14 0.840″
Mitchell 2 1/4″ Instruments
Part No. Description
MIT D1-211-5088 Oil Temp Gauge 2 1/4″ 250 degree F Oil or Water PMA, Mitchell
Oil Temp Gauge 2 1/4″ 300 degree F Oil PMA, Mitchell
MIT D1-211-5090 Oil Temp Senders Avail in 250 or 300 deg F 5/8-18 or 1/8 NPT.
Oil Pressure Kit 2 1/4″ 0-80 psi, Mitchell
MIT D1-211-5052 Uses Mitchell Oil Pressure Sender:
80 psi MIT PS-211-9002
Oil Pressure Kit 2 1/4″ 0-100 psi, Mitchell
MIT D1-211-5056 Uses Mitchell Oil Pressure Sender:
100 psi PS-211-9039
Oil Pressure Kit 2 1/4″ 0-100 psi, Mitchell
MIT D1-211-5058 Uses Mitchell Oil Pressure Sender:
150 psi PS-211-9040
Fuel Pressure Gauge 2 1/4″ 0-30 psi, Mitchell
MIT D1-211-5063 Uses Mitchell Pressure Sender:
30 psi MIT PS-211-9000
MIT D1-211-5062 Fuel Pressure Gauge 2 1/4″ 0-15 psi, Mitchell
Exhaust Gas Temp Kit, 0-1600 deg gauge, Mitchell
MIT D1-211-5051 Guage, lead, thermocouple probe and weld-on proge adapter
MIT PS-211-8163 Probe EGT Band Clamp Type, Mitchell
MIT D1-211-5102 CHT Gauge 2 1/4″ 100-600 degree PMA, Mitchell
MIT PS-211-8010 Cylinder Head Temp Lead Wire 10′, Mitchell
MIT PS-211-8156 Cylinder Head Temp Probe Type, Mitchell
MIT PS-211-8168 Cylinder Head Temp Sender 18mm, Mitchell
MIT D1-211-5104 Ammeter 2 1/4″ with 30-0-30 amps, Mitchell
MIT D1-211-5106 Ammeter 2 1/4″ with 60 amp, Mitchell
MIT D1-211-5074 Fuel Lever Gauge 2 1/4″ PMA’d 0-200 Ohm, Mitchell
MIT PS-211-8038 Sender Fuel quantity PMA 10-180 Ohm, Mitchell
MIT D1-211-5086 Voltmeter gauge 2 1/4″ 8-16 volt DC, Mitchell
Mitchell Aircraft Products, Inc. Gauges are American manufactured to exceed TSO specifications yet are affordable for home-built aircraft. Selected models are PMA approved. All gauges fit standard 2 1/4″ holes and have a full 2 year factory waranty. Gauges are standard 12 volt operation and include internal lighting. 24 volt operation only requires a small ballast resistor. Call for special range marks available, at additional cost.