Tools and Supplies
Tools and Supplies
CRC
For nearly 50 years CRC has gained the respect of technicians, drivers and distributors alike by providing superior quality products they can count on — and you can too.
From brake and electrical maintenance to aviation, gear oil and diesel additives, CRC has got you covered.
Aviation Degreaser
A Halogenated solvent-based degreaser that is chemically stable and extremely effective in heavy duty cleaning applications. It is fast acting, non-flammable and evaporates quickly leaving no residue.
-Non-Flammable
-Effectively removes corrosion inhibiting compound
-Removes carbon build-up
-High dielectric strength of 26,800 volts
-Cleans and prepares metal surfaces for painting and adhesive bonding
-Meets performance requirements of Boeing D6-17487 and Douglas CSD-1, Category II with the exception of acrylic crazing
-Not for use in California
Part Number Container Size Units Per Case
10900 20 oz Aerosol 12
C.I.C. Remover
Revolutionary alternative to 1,1,1-Trichlorothethane and other chlorinated solvents that effectivly removes grease, oil, dirt and other contaminants from aircraft interior surfaces and equipment.
-Low odor compound, unlike strong smelling citrus cleaners
-High flashpoint - over 200°F
-Promotes operating efficiency and longer equipment life
-High dielectric strength of 39,600 volts
-Chemically stable, non-conducting and non-corrosive action
-Controlled evaporation for enhanced cleaning action
-Zero VOC formula
Part Number Container Size Units Per Case
10480 20 oz Aerosol 12
10482 5 gallon pail 1
10483 55 gallon drum 1
Precision Plus® Contact Cleaner
A high purity HCFC/PFC-based precision cleaner that quickly and effectivly cleans sensitive electrical and electronic components. PRECISION PLUS Contact contains HCFC-225 which may only be sold to commerial users.
-Plastic Safe
-Non-Flammable
-Evaporated quickly and leaves no residue
-Non-staining and non-corrosive
-Meets performance requirements of Boeing D617487, Rev L,Douglas CSD-1, ASTM F945 and PWA 36604 Appensix A
-Approved by Pratt & Whitney for use in SPOP6
Part Number Container Size Units Per Case
10310 16 oz Aerosol 12
Aviation NT™ Precision Cleaner
Patented formula NT Precision Cleaner relies on advanced COzol® Technology to effectivly remove dirt, light oils and other contaminants from electronic equipment. It evaporates quickly and leaves no residue. NT Precision Cleaner has no flash point and contains no Class I or Class II ozone depleting chemicals and is an optimal alternative to HCFC 141b-based cleaners when sensitive plastics aren’t an issue.
-No flash point
-Fast evaporation, leaves no residue
-Non-corrosive, non-conductive and chemically stable
-High dielectric strength of 30,800 volts
-Tests on plastics
-Meets performance requirements of Boeing D6-17487
-Not for use in California
Part Number Container Size Units Per Case
10320 16 oz Aerosol 12
Precision Contact Cleaner
A high purity HCFC-based precision cleaning solvent designed to meet today’s clening challenges. Precision Contact Cleaner Contains HCFC (141b) which has users restrictions and may only be sold to commerical users for applications consistant with the regulation.
-Fast evaporating, leaves no residue
-Effectively cleans to help maintain peak operating performance
-No flashpoint, non-conductive and non0corrosive
-Fast cleaning action for the removal of flux, light oils and other containmants
-Surpasses performance properties of conventional precision cleaners
Part Number Container Size Units Per Case
10330 16 oz Aerosol 12
3-36® Multi-Purpose Lubricant and Corrosion Inhibitor
Meets MIL-C-81309E, Amendment 3, Type III, Class 1 & 2 - Listed on teh Military QPL Since 12/1999. This versatile, Petroleum-based formula lubricates penetrates, cleans and protects all metal surfeaces. It loosens seized mechanisms and frozen fasteners while leaving behind a lubricating and corrosion inhibiting film. The low viscosity of Aviation 3-36 allows it to cover a large surface area and penetrate deep into the surface of all metals including steel, copper, brass and aluminum alloys. It displaces and seals out moisture and prevents the return of wear and corrosion. For use in applications that require comliance to MIL-C-81309E.
-Lubricats, penetrates, cleans and protects all metal surfaces
-Loosens seized mechanisms and frozen fasteners
-Prevents corrosion to improve equipments life and performance
-Continues to protect even after intial product application
Part Number Container Size Units Per Case
10200 16oz Aerosol 12
10202 5 gallon pail 1
10203 55 gallon drum 1
Aviation XT-2000™ Precision Cleaner
A non-flammable, low odor, rapidly evaporating precision cleaner for use in elecrtical and indutrial applications. Effectivley removes dirt, light oils and other contaminants from electronic equipment.
-No flash point
-Evaporates rapidly leaving no residue
-Chemically stable, non-conductive and non-corrosive
-Safe on most plastics
-Meets performance requirements of Boeing D6-17487
Part Number Container Size Units Per Case
10315 16 oz Aerosol 12
Quick Dry Precision Cleaner
Effectively removes contaminants from electrical and electronic components and contacts. Ideal for applications where rapid evaporation is desired and flammability is not an issue.
-Harmless to most sensative plastics
-Evaporates rapidly, leaves no residue
-Displaces moisture
-Meets performance requirements of Boeing D6-17487 and McDonnell Douglas CSD-1 specifications
Part Number Container Size Units Per Case
10340 16oz Aerosol 12
Aviation Window Cleaner
A modern blend of detergents and corrosion inhibitors designed to safely clean aircraft glass, Plexiglass and other surfaces.
-Non-irritating
-Penetrates through film and other surfaces contaminants to get galss and mirrors sparkling clean
-Removes grease, fingerprints, scum and smoke haze from surfaces
-Contains no alcohol or ammonia
-Meets the performance requirements of AMS-1534A
Part Number Container Size Units Per Case
10420 16oz Aerosol 12
Mouse Milk
Penetrating Oil
For speedy help in removal of rusted or frozen studs, nut and bolts; frees up cables, slides and linkage; unequalled wherever a lubricant and penetrant are required. Lasting lubricating qualities
8 Oz. P/N 09-39608
32 Oz. P/N 09-39632
Tempo
Tempo manufactures a complete line of marine spray paint, features color matches for all popular makes and models.
Tempo’s unique Fan spray valve covers more area, more evenly and faster. Because the user can hold the can only 6-8 inches from the surface to be painted. There is more accuracy and less over spray. Exact match to OEM color standards. Gasoline and abrasion resistant.
Aviation Coatings
Epoxy Propeller Coating
A-150 Flat Black
A-151 Grey Hartzell
Tempo Paint Products
A-152 White
Aircraft Engine Enamel
A-219 Lycoming Grey
A-239 Olds Continental Gold
A-241 Gross Black
Aircraft Laquer
A-808 Dull Aluminum
A-810 Flat Black
Self Etch Primer
A-880 Grey
Aircraft Enamel
A-1100 Black
A-1102 Flat Black
A-1105 Medium Grey
A-1107 Flat White
A-1109 Gross White
A-1120 Red
A-1140* Aluminum
Aircraft Primers - Zinc Phosphate Primers
A-701 Yellow
A-702 Green
Tools
Hand Assembly Tools
For use with Aeroquip 491 and 451 Fittings. Tools are cadmium plated hardened steel with a precision cone seat driving surface. They are recommended to avoid damage to the sealing surface and to property support the inner tube, thus eliminating cut rubber flaps and inner tube bulge.
Part No. Fitting P/N Tube Size O.D.
S1051-3 491-3 3/16
S1051-4 491-4 1/4
S1051-5 491-5 5/16
S1051-6 491-6 3/8
S1051-8 491-8D 1/2
S1051-10 491-10D 5/8
S1051-12 491-12D 3/4
S1051-16 491-16D 1
S1051 Kit -3 thru -20 -
F2636 Hand Band Clamp Tool
RA716 Vacuum Pump Wrench
Provides superior access to the vacuum pump flange nuts. Quality hardened steel with corrosion resistant nickel plating. Shaped to provide easy access to tight areas between the pump and accessories. Plastic coated handle provides a firm grip.
Safety Wire Pliers
Features twisting lock pliers with auto return; cutting edge, cuts and twists .060 safety wire or less.
WWP109 – 9” Length
WWPP109A – 6” Length
Champion Tools and Accessories
CT- 415 Gap Setting Tool CT - 450 Gap Gauge
CT – 456 Plug Viewer CT – 457 Fine Wire Gap Gauge
CT – 470 Heavy Duty Oil Can Cutter CT – 907 Magnetic Plug Socket
CT – 475 Spark Plug Cleaner and Tester FMC12 Spark Plug Tray
2612 Thread Lubricant 91893 Abrasive Compound
Tube Fittings
AN806 Plug – Flared Tube
Dash No. Alum. Tube O.D. Thread Size Dash No. Steel
-2D 1/8” 5/16-24 -2
-3D 3/16” 3/8-24 -3
-4D 1/4” 7/16-20 -4
-5D 5/16” 1/2-20 -5
-6D 3/8” 9/16-18 -6
-8D 1/2” 3/4-16 -8
-10D 5/8” 7/8-14 -10
AN819 (MS20819) Sleeve - Coupling
Dash No. Alum. Tube O.D. Dash No. Steel
-2D 1/8” -2
-3D 3/16” -3
-4D 1/4” -4
-5D 5/16” -5
-6D 3/8” -6
-8D 1/2” -8
-10D 5/8” -10
AN815 Union – Flared Tube
Dash No. Alum. Tube O.D. Thread Size Dash No. Steel
-2D 1/8” 5/16-24 -2
-3D 3/16” 3/8-24 -3
-4D 1/4” 7/16-20 -4
-5D 5/16” 1/2-20 -5
-6D 3/8” 9/16-18 -6
-8D 1/2” 3/4-16 -8
-10D 5/8” 7/8-14 -10
AN821 Elbow, 90° - Flared Tube
Dash No. Alum. Tube O.D. Thread Size Dash No. Steel
-2D 1/8” 5/16-24 -2
-3D 3/16” 3/8-24 -3
-4D 1/4” 7/16-20 -4
-5D 5/16” 1/2-20 -5
-6D 3/8” 9/16-18 -6
-8D 1/2” 3/4-16 -8
-10D 5/8” 7/8-14 -10
AN816 Nipple – Flared Tube and Pipe Thread
Dash No. Alum. Tube O.D. Pipe Thread Dash No. Steel
-2D 1/8” 1/8” -2
-3D 3/16” 1/8” -3
-4D 1/4” 1/8” -4
-4D 1/4” 1/4” -4-4
-5D 5/16” 1/8” -5
-6D 3/8” 1/4” -6
-6-2D 3/8” 1/8” -6-2
-6-6D 3/8” 3/8” -6-6
-7D 1/2” 1/4” -7
-8D 1/2” 3/8″ -8
-10D 5/8” 1/2” -10
-12D 3/4” 3/4” -12
AN822 (MS20822) Elbow, 90° - Flared Tube and Pipe Thread
Dash No. Alum. Tube O.D. Pipe Thread Dash No. Steel
-2D 1/8” 1/8” -2
-3D 3/16” 1/8” -3
-4D 1/4” 1/8” -4
-4 -4D 1/4” 1/4” -4-4
-5D 5/16” 1/8” -5
-6D 3/8” 1/4” -6
-6-2D 3/8” 1/8” -6-2
-6-6D 3/8” 3/8” -6-6
-8D 1/2” 3/8″ -8
-10D 5/8” 1/2” -10
AN818 NUT - Coupling
Dash No. Alum. Tube O.D. Thread Size Dash No. Steel
-2D 1/8” 5/16-24 -2
-3D 3/16” 3/8-24 -3
-4D 1/4” 7/16-20 -4
-5D 5/16” 1/2-20 -5
-6D 3/8” 9/16-18 -6
-8D 1/2” 3/4-16 -8
-10D 5/8” 7/8-14 -10
AN823 (MS20823) Elbow, 45° - Flared Tube and Pipe Thread
Dash No. Alum. Tube O.D. Thread Size Dash No. Steel
-2D 1/8” 1/8” -2
-3D 3/16” 1/8” -3
-4D 1/4” 1/8” -4
-5D 5/16” 1/8” -5
-6D 3/8” 1/4” -6
-8D 1/4” 3/8” -8
-10D 5/8” 1/2” -10
-12D 3/4” 3/4” -12
AN824 Tee – Flared Tube
Dash No. Alum. Tube O.D. Thread Size Dash No. Steel
-2D 1/8” 5/16-24 -2
-3D 3/16” 3/8-24 -3
-4D 1/4” 7/16-20 -4
-5D 5/16” 1/2-20 -5
-6D 3/8” 9/16-18 -6
-8D 1/2” 3/4-16 -8
-10D 5/8” 7/8-14 -10
AN833 Elbow, 90° - Flared Tube, Bulkhead and Universal
Dash No. Alum. Tube O.D. Thread Size Dash No. Steel
-2D 1/8” 5/16-24 -2
-3D 3/16” 3/8-24 -3
-4D 1/4” 7/16-20 -4
-5D 5/16” 1/2-20 -5
-6D 3/8” 9/16-18 -6
-8D 1/2” 3/4-16 -8
-10D 5/8” 7/8-14 -10
AN825 (MS20825) Tee – Flared Tube with Pipe Thread on Side
Dash No. Alum. Tube O.D. Pipe Thread Dash No. Steel
-2D 1/8” 1/8” -2
-3D 3/16” 1/8” -3
-4D 1/4” 1/8” -4
-5D 5/16” 1/8” -5
-6D 3/8” 1/4” -6
-8D 1/2” 3/8” -8
-10D 5/8” 1/2” -10
AN834 Tee – Flared Tube, Bulkhead and Universal
Dash No. Alum. Tube O.D. Thread Size Dash No. Steel
-2D 1/8” 5/16-24 -2
-3D 3/16” 3/8-24 -3
-4D 1/4” 7/16-20 -4
-5D 5/16” 1/2-20 -5
-6D 3/8” 9/16-18 -6
-8D 1/2” 3/4-16 -8
-10D 5/8” 7/8-14 -10
AN826 (MS20826) Tee – Flared Tube with Pipe Thread on Run
Dash No. Alum. Tube O.D. Thread Size Dash No. Steel
-2D 1/8” 1/8” -2
-3D 3/16” 1/8” -3
-4D 1/4” 1/8” -4
-5D 5/16” 1/8” -5
-6D 3/8” 1/4” -6
-8D 1/2” 3/8” -8
-10D 5/8” 1/2” -10
AN837 Elbow, 45° - Flared Tube, Bulkhead and Universal
Dash No. Alum. Tube O.D. Thread Size Dash No. Steel
-2D 1/8” 5/16-24 -2
-3D 3/16” 3/8-24 -3
-4D 1/4” 7/16-20 -4
-5D 5/16” 1/2-20 -5
-6D 3/8” 9/16-18 -6
-8D 1/2” 3/4-16 -8
-10D 5/8” 7/8-14 -10
AN832 Union – Flared Tube, Bulkhead and Universal
Dash No. Alum. Tube O.D. Thread Size Dash No. Steel
-2D 1/8” 5/16-24 -2
-3D 3/16” 3/8-24 -3
-4D 1/4” 7/16-20 -4
-5D 5/16” 1/2-20 -5
-6D 3/8” 9/16-18 -6
-8D 1/2” 3/4-16 -8
-10D 5/8” 7/8-14 -10
AN840 Hose Nipple – Pipe Thread
Dash No. Alum. Hose I.D. Pipe Thread Dash No. Brass
-4D 1/4” 1/8” -4
-6D 3/8” 1/4” -6
-8D 1/2” 3/8” -8
-10D 5/8” 1/2” -10
AN842 Hose Elbow, 90° - Pipe Thread
Dash No. Alum. Hose I.D. Pipe Thread Dash No. Brass
-4D 1/4” 1/8” -4
-6D 3/8” 1/4” -6
-8D 1/2” 3/8” -8
-10D 5/8” 1/2” -10
AN913 (MS20913) Plug – Square Head
Dash No. Alum. Hose I.D. Pipe Thread Dash No. Brass
-1D 1/8” 1/8” -1
-2D 1/4” 1/4” -2
-3D 3/8” 3/8” -3
-4D 1/2” 1/2” -4
AN844 Hose Elbow, 45° - Pipe Thread
Dash No. Alum. Hose I.D. Pipe Thread Dash No. Brass
-4D 1/4” 1/8” -4
-6D 3/8” 1/4” -6
-8D 1/2” 3/8” -8
-10D 5/8” 1/2” -10
AN917 Tee – Internal Thread
Dash No. Alum. Hose I.D. Pipe Thread Dash No. Brass
-1D 1/8” 1/8” -1
-2D 1/4” 1/4” -2
-3D 3/8” 3/8” -3
-4D 1/2” 1/2” -4
AN910 Coupling
Dash No. Alum. Hose I.D. Pipe Thread Dash No. Brass
-1D 1/8” 1/8” -1
-2D 1/4” 1/4” -2
-3D 3/8” 3/8” -3
-4D 1/2” 1/2” -4
AN919 Reducer – External Thread, Flared Tube
Dash No. Alum Tube OD Lg End Tube OD Sm End Dash No. Steel
-1D 1/4” 1/8” -1
-2D 1/4” 3/16” -2
-3D 5/16” 1/4” -3
-4D 3/8” 1/8” -4
-6D 3/8” 1/4” -6
-7D 3/8” 5/16” -7
-8D 1/2” 1/8” -8
-9D 1/2” 3/16″ -9
-10D 1/2” 1/4” -10
-11D 1/2” 5/16 -11
-12D 1/2” 3/8” -12
AN911 Hex Shoulder Nipple
Dash No. Alum. Pipe Size Dash No. Brass
-1D 1/8” -1
-2D 1/4” -2
-3D 3/8” -3
-4D 1/2” -4
AN912 Bushing – Reducer
Dash No. Alum. Pipe Size Dash No. Brass
-1D 1/4 x 1/8” -1
-2D 3/8 x 1/4” -2
-3D 3/8 x 1/8” -3
-4D 1/2 x 3/8” -4
-5D 1/2 x 1/4” -5
-6D 1/2 x 1/8” -6
-7D 3/4 x 1/2” -7
-8D 3/4 x 3/8” -8
AN924 Nut – Flared Tube, Bulk Head and Universal Fitting
Dash No. Alum. Tube O.D. Thread Size Dash No. Steel
-2D 1/8” 5/16-24 -2
-3D 3/16” 3/8-24 -3
-4D 1/4” 7/16-20 -4
-5D 5/16” 1/2-20 -5
-6D 3/8” 9/16-18 -6
-8D 1/2” 3/4-16 -8
-10D 5/8” 7/8-14 -10
AN929 Cap (Assembly) – Pressure Seal Flared Tube Fitting
Dash No. Alum. Tube O.D. Thread Size Dash No. Steel
-2D 1/8” 5/16-24 -2
-3D 3/16” 3/8-24 -3
-4D 1/4” 7/16-20 -4
-5D 5/16” 1/2-20 -5
-6D 3/8” 9/16-18 -6
-8D 1/2” 3/4-16 -8
-10D 5/8” 7/8-14 -10
AN938 Tee – Internal Screw Thread
-4D 1/4” 7/16-20 -4
-5D 5/16” 1/2-20 -5
-6D 3/8” 9/16-18 -6
-8D 1/2” 3/4-16 -8
-10D 5/8” 7/8-14 -10
Breeze Clamps
Stainless Steel band with slotted hex-head carbon steel screw.
QS100M
Dash No. Range of Diameter (In.) Min./Max.
-06H 7/16 25/32
-08H 1/2 29/32
-10H 9/16 1-1/16
-12H 1-1/16 1-1/4
-16H 13/16 1-1/2
-20H 13/16 1-3/4
-24H 1-1/16 2
-28H 1-5/16 2-1/4
-32H 1-9/16 2-1/2
-36H 1-13/16 2-3/4
-48H 2-9/16 3-1/3
Other Sizes and QS200M (all stainless steel) clamps also available – Call for Prices
Miniature Clamps
These Clamps can handle pressure up to 1000 psi with less than 15 inch-pounds of torque.
Part Number Min Max
6504 7/32 5/8
6506 7/16 25/32
6508 1/2 29/32